iD Organic Mold Cleaner

No CFC’S or Harmful Propellants   •   Meets FDA Regulations   •   Environmentally Safe

iD Organic Mold Release

iD Additives Organic Mold Release is formulated with the environment in mind and all products are nonyl-phenol free (no NP-surfactants), ODC free (no ozone depleting chemicals), and HAP free (no hazardous air pollutants). Provides more releases per spray with no mold build up and prevents even the most challenging parts from hanging up and causing loss in valuable production time.

Meets the requirements for use in food industry applications under 21 CFR 175.300 (b) (3) xxv & xxvii making this a great mold cleaner for Medical and Food applications.

 

Features and Benefits

  • 100% Natural Formulation

  • Environmentally Safe and Non-Toxic

  • Medical and Food Applications

  • Heat Stableto 600⁰F

  • Refillable Atomizer Sprayer System

  • Meets FDA Regulations

  • No CFC’s or Harmful Propellants

iD Neutral Mold Release

iD Additive’s Neutral Mold Release is formulated with high quality White Mineral Oil. Provides more releases per spray with no mold build up and prevents even the most challenging parts from hanging up and causing loss in valuable production time.

Meets the requirements for use in food industry applications under 21 CFR 175.300 (b) (3) xxv & xxvii making this a great mold release for Medical and Food applications.

For use with ABS, Acetal, Acrylic, Nylons, Polycarbonate, Polyester, Polyethylene, Polypropylene, Polystyrene and Rubber.

Features and Benefits

  • Paintable, Non-Silicone

  • Excellent All Purpose Release

  • Medical and Food Applications

  • Refillable Atomizer Sprayer System

  • Meets FDA Regulations

  • No CFC’s or Harmful Propellants

  • Heat Stable to 650⁰F

iD Silicone Mold Release

iD Additives Silicone Spray Mold Release is formulated with high quality silicone oil. Provides more releases per spray with no mold build up and prevents even the most challenging parts from hanging up and causing loss in valuable production time.

Meets the requirements for use in food industry applications under 21 CFR 175.300 (b) (3) xxv & xxvii.  

   

For use with ABS, Acetal, Acrylic, Nylons, Polycarbonate, Polyester, Polyethylene, Polystyrene and Rubber.

Features and Benefits

  • High Concentration

  • No Build Up

  • Heat Stable to 495⁰F

  • Refillable Atomizer Sprayer System

  • Meets FDA Regulations

  • No CFC’s or Harmful Propellants

Refillable Atomizer Sprayer System

Atomizer Sprayers will provide a uniform spray of mold release—without CFC’s, Freon, or other potentially dangerous propellants.  Instead, these sprayers use readily available compressed air as the propellant.  They are as easy to use as aerosol… just point and spray. And, they are refillable and rechargeable. When you run out of product or want to change liquids, just depressurize, refill, close and recharge. It’s that simple!

The sprayers are the same diameter as an aerosol can and can be used with many products. Standard maintenance includes periodically replacing the Valves and Nozzles. These parts are available both individually and in complete repair kits.