iD Rust Preventative leaves a clear protective coating that displaces moisture utilizing a non-chlorinated and non-flammable critical solvent. It helps remove rust and is compatible with lubricating oil and greases. iD Rust Preventative does not have to be removed before using molding dies but can be removed easily. Apply liberally using an iD Additives Air Atomizer.

Suitable for food contact use as indicated in Title 21 of the Code of Federal Regulations. The appropriate sections for release agents are 175.300, 177.2600, 178.3570 and 181.28. Federal Definitions and Standards of identity for Food CFR 121.101 (G.R.A.S.).

Features and Benefits

  • Acid Neutralizer

  • Contains no Hazardous Air Pollutants

  • Non-Flammable

  • Moisture Displacing

  • Lasting Protection

  • Meets FDA Regulations

  • Does Not Contain Silicone

  • No CFC’s or Harmful Propellants

Atomizer Sprayers will provide a uniform spray of iD Rust Preventative – without CFC’s, Freon, or other potentially dangerous propellants. Instead, these sprayers use readily available compressed air as the propellant. They are as easy to use as aerosol… just point and spray. And, they are refillable and rechargeable. When you run out of product or want to change liquids, just depressurize, refill, close and recharge. It’s that simple!

The sprayers are the same diameter as an aerosol can and can be used with many products. Standard maintenance includes periodically replacing the Valves and Nozzles. These parts are available both individually and in complete repair kits.

iD Rust Preventative